Our Blog

Bathroom Design: All You Need to Know

Bathroom Design: All You Need to Know

When you want to design a bathroom, you should consider its primary purpose and whoever it will serve. Is it a master bath for a couple of the house? Or is it a bathroom for the kids? How old are the users? Is the bathroom for your in-laws, or is it attached to an all-purpose guest bedroom? These questions should guide you on the kind of bathroom design.

Any bathroom, whether big or small, can take a lot longer to remodel than you might first think, but this can be made simple by a little planning. Whether you are working alone on this plan or with a contractor, the step-by-step guide below herein will help you to plan, design, and build your new bathroom quickly and save you time, money, and hassle.

The Layout

It is not easy to attain the best bathroom layout, especially when you are building a new home. However, when you are remodelling an existing bathroom, it could be less daunting because the plumbing structure is already in place. But even if the old layout is already available, you should think carefully about changing the whole built. Is it worth the cost? At this time, you should consider single or double vanities’ shower, tub, or both. Also, think of where you’re going to put the toilet.

Plumbing work

If you get your bathroom plumbing right, then you will have a perfect bathroom. Using the right-sized pipes and drains will make a massive difference in the functionality of the bathroom; but the more extensive the drain; the less likely it is to clog.

Bathroom Floor and heating

All modern bathrooms have tiled floors which also help in retaining heat, and your bathroom should not be any different. You can invest in the heating system and have a timer to regulate the worming to avoid running all day unnecessarily.

Toilet

You cannot plan for your bathroom without considering the toilet. Whether you are interested in a modern wall-mounted model or a more traditional floor-mounted model, you have to get advice from a professional plumber because it’s directly related to the general plumbing.

Vanities and Sinks

Modern bathroom vanities have a lot more drawer storage than they used to. Drawers are accessible and are more flexible. You should set the height of your vanity depending on whether you want a sink flush that has a countertop or a vessel sink that only sit on top of it. Currently, the standard height for bathroom vanity is about 36” which is similar to the kitchen. However, you can opt for a floating vanity.

Conclusion 

Bathrooms are part of our lives, and you should consider yours as necessary as any other room in your house and perhaps even more crucial than you can imagine. That’s why we entrust Hobart Bathroom Renovations every time! When planning for your bathroom, consider the lighting system, windows, vent fan and skylights. With the few tips provided above, you can have an easy way out when planning for your bathroom, but you can seek help from other professionals when necessary. All the best!

What to Ask Your Builder before Renovating Your Bathroom

Before renovating your bathroom, there are vital questions you need to ask your builder to ensure that the remodelling is done seamlessly.

Here are the key questions to ask your builder before assigning them for a bathroom renovation Mackay.

What’s the best flooring for my restroom? 

Regardless of anything else, consider safety while choosing anew floor for your restroom. At times, safety implies overlooking the helpful pictures displayed in very good quality home magazines, which frequently exhibit unrealistic marble floors. Venturing out of a tub with wet feet onto a cleaned marble floor is a catastrophe waiting to happen. Therefore, consider slip-safe ceramic tile. Also, in case you’re contemplating carpeting your restroom, don’t. Carpeting is totally inadmissible for the washroom. The carpet absorbs water, grows terrible smells, and expands the danger of moulds and mould development. In like manner, genuine wood and overlay flooring are unsatisfactory for the washroom since they can in the long run twist or delaminate from exposure to water. Waterproof flooring, such as tile or vinyl offer the best options for your bathroom floor.

 How might I make enough stockpiling? 

Most washrooms have less area than different rooms in the house, yet they need to store a lot of fundamentals, from cleanser to latrine cleaner, and from mouthwash to visitor towels. While there may not be sufficient space in a washroom to oblige a full material wardrobe, you can expand capacity by thinking creatively. Settle on an encased vanity rather than a platform sink to give under-sink stockpiling. Plan to install a lot of towel bars or snares, and utilize stackable receptacles in cupboards.  Before you think of creating more storage solutions, consider what to put where—and organize making ordinary use things like washing items available where you need them most. 

Do I need a shower or only a tub? 

If a property holder has the advantage of having more than one restroom in the house, it’s a smart thought to install a walk-in-shower in at least one of them. If you have a shower somewhere in the house, then only a tub is presumably fine in the current redesign. Else, you ought to include a walk-in-shower as your future investment.

How significant is ventilation? 

Washrooms are famously moist. Similarly as long, hot showers leave mirrors steamed up, that equivalent dampness likewise coats the walls and woodwork—regardless of whether you don’t see it. The damp condition can turn into a favourable place for mould and mildew, except if you take allots to dry the space. 

What would it be advisable for me to search for in new washroom installations? 

Property owners have an abundance of alternatives to choose from while updating the washroom, including fixtures that offer a mix of incredible plan, solace, and high effectiveness. Notwithstanding, fixture costs add up rapidly, with extravagant conveniences like warmed latrine seats and high-end showers furnished with different shower heads. 

Putting the greatest emphasis on productive features can assist you with recovering expenses in your month to month service bills while additionally profiting.

Roof Repair or Roof Replacement?

Replacing an entire roof can be expensive, and most property owners will try to put off this task for for as long as possible.  In the meantime, you can either do minor repairs jobs or patching up leaks that won’t cost you much at the time, or you can get a roofing specialist to do a more thorough repair that will help extend the life cycle of the roof.  Here are a few tips to help you decide whether it’s worth going all in and replacing the old roof as opposed to doing more repairs.

When Old Roof Repairs Are Best

If you don’t have the funds for a full roof replacement, then a good repair can help you extend the roof for a few more years.  Here are a few times when old repairs are of best use.

  • If your roof is only damaged in a small area or on one side of your home, then a repair may be the better option! The only problem here is that the new roofing materials might look different to your old tiles so it may look a bit strange.
  • If your roof is still in relatively good condition, then you should definitely only do a smaller repair like a fresh coat of paint and some sealer which can make a world of difference.
  • If you are planning on selling your property in the near future, then a few roof repairs and a renovation is worth doing. To make sure you get the best return for your property it’s always advisable getting a full roof restoration before selling.
  • A roof restoration can offer your roof a new lease of life with a full clean, paint, reseal and renovate!

When a Complete Roof Replacement is Best

 Here are a few times when it is best to get a full roof replacement instead of only doing smaller repairs.

  • If the damage to your roof is extensive, then it is best to just get a roof replacement.  Repairs are charged per square metre, and if the damaged area is just very large, then your repairs can easily cost just as much as as replacing it.
  • A new roof can increase your property dollar value dramatically and can make home life a lot more functional if you choose the right materials and colour scheme and will keep you safe from the elements and harsh weather!
  • Roofs that are made of cheap materials are best to be replaced with something more durable.  Why waste money on a low cost fix when you can get a high-quality re-roof for a small outlay?

If these tips are still not enough to help you decide between a roof repair, restoration and replacement, then the best thing you can do is to give Hawkesbury Roof Restoration a call. The team specialise in roof restoration and can repair your old roof very easily! Our team are mobile and can travel all across NSW!

A Guide to Choosing The Right Decking

Decking is a fascinating home decor that adds taste to your home or garden. With the existence of multiple designs for decking, it can be troublesome for you to pick the right one that will align with your needs. 

In this article, you will get a lot of insights on what to consider when choosing the right deck if you live in Townsville.

The types of decking materials

There exist three different types of materials for decking your house; softwood, hardwood, and composite.

  • Softwood

It is a type of material that comes from tree sources with a rapid growth rate, such as pines. Softwood decking is cheaper as compared to the other materials. However, it does not last for a longer time and requires continuous maintenance. Softwood timber can also fit well with your budget, unlike hardwood and composite that is more expensive.

  • Hardwood

This type of decking comes from slow-growing trees, like oak, which seems a little bit scarcer and more expensive than decking options. Hardwood timber, unlike softwood decking, requires less maintenance and can, therefore, last for at least fifty years, making it the most impressive decking option.

  • Composite

The composite decking option is a blended mixture of both wood and plastic materials. Its material is durable and possesses fascinating features that regular wood cannot. Some individuals prefer the composite option since it is simple to maintain and shuns the growth of algae.

You can also consider other factors when picking the right decking option, including:

Slipping property of the decking material

Depending on your locality and the climatic environment conditions, considering an anti-slipping property on your deck is good. You can also prioritize anti-slipping decking options in your washrooms to maximize your safety.

Maintenance Level of the decking material

Regardless of the material type you pick as your decking option; you need to comply with more guidelines on how to offer maintenance for your decking. Take a look below:

  • Do some frequent cleaning on the decking surface, mostly on softwoods, at least twice every year.It will assist in improving the durability of the material.
  • It is also advisable to avoid making contacts of any iron-made furniture directly with the deck to shun from stains.
  • Timber-made materials require you to clean your deck off from dry leaves, which normally result in stains after getting wet, leading to quick damage.

Final thoughts

With the diverse options available when selecting a decking option, it is not easy to choose the right one. The guidelines mentioned above can assist you in picking the option that best fits your needs.

So if you require a Townsville deck builder, you can give Townsville Decking Specialists a call.

Possible Site Dangers of Stump Grinding

Stump grinding is a tree service that involves the requirement to go underneath the ground. Hence, if you are not trained to do so, it could pose different types of risks. If this is your case, you need to guarantee that the stump grinding service provider you’ll be hiring won’t damage any existing services. Fortunately, a Townsville Tree Services provider is here to help you complete this job safely and effectively. Here are some of the possible site dangers of stump grinding service you need to pay attention and prevent as much as you can. 

Glass hazards 

Our professional stump service operators will scan through the stump’s environment and surroundings. When there are several glass doors near the stumps, we’ll ask the clients to secure the glass themselves. One of the examples of materials that can secure your glass is a three-ply wood. 

Wire fencing 

We have to make sure that the entire wires will be pulled back from the stump to guarantee that it won’t get caught in the stump grinder’s head. 

Pool areas 

First, we have to locate where the pool pump is located and whether there can be any piping that directly lays below the stump. When there’s a pool pipe below the stump, we can do a thorough surface grind.  

Waterline 

Basically, water services reach inside the front part of your property. When there’s a stump placed at the front of your house, we’ll have to make sure that no water piping in that directly runs below the stump. We will request manually dig a perpendicular trench to identify the deepness of the underground service. One of the alternatives we can offer is to do a surface grind over the stump where we believe there might be services below.  

Storm Water 

This could extend anywhere in your home. Stormwater will amass any rainwater, which usually runs the ground and roofs. Utilized in the pooling of groundwater, as opposed to household greywater and sewerage. Again, we would like to guarantee that we will definitely make sure that we won’t cause harm to this piping unless the owner would go for replacing the pipeline after the process of stump grinding.  

Electricity 

Electricity has 2 means of getting into your home. Either from a junction box that sits out ahead of your property or via overhead power lines. When there’s a stump that has a probable power cable that runs nearby, we’ll have to know the power cable’s exact location. Because of a high-risk level. We suggest that clients must dig a trench on both sides of the stump that’s upright to the wire. This way, you can assess the depth of which the line lies. When this isn’t favorable for you, we can do a surface grind. 

Human risks 

While we’re doing stump grinding, we have to guarantee that nobody will stand too near to the stump grinding machine since there’s a slight possibility of odd stones or wood chips to be thrown from the stump grinder, which could be hazardous for people near it. 

How to Fix a Leaking Roof

Things To Remember to repair a Leaking Roof

A leaking roof can be a living nightmare for a homeowner. If you don’t attend to leak straight away, it can cause significant damage to your house. Therefore, it is important to pinpoint it straight away and correct a leaky ceiling as soon as possible before it escalates into a significant issue.

Before you do any repair, you have to find out where the leak is coming from. You can do this by searching the interior of your house via a flashlight. Investigate any leaking evidence, such as rotten woods, black marks, and moulds. If you struggle to find from inside, use a garden hose and try examining it from on top of the roof.

If you don’t know what it takes to repair a leaky roof, don’t worry; you are in the right place. In this article, will give you a breakdown how to attack the situation!

  • Patch up any holes

The small holes occur when roofing nails are misplaced or exposed. To repair them, pull the pins and then patch the holes through flashing.

  • Make sure you replace the step flashing

If you don’t nail a step flashing correctly, it can fall and cause leaks on the wall. To get around this you must look to remove shingles that are attached to the damaged step flashing. Next, replace the defective step flashing with a fresh piece. Ensure you that you nail the step flashing after replacement.

  • Repairing a plumbing vent

Missing nails or a cracked casket can cause vent leak. In case your plumbing vent is metallic, it is advisable to examine it for a broken seam. If the seam is cracked or broken, replace it with a new one. However, if the leak is due to missing nails, change them with rubber washer screws.

  • Repairing a leaking roof on the chimneys

Sometimes, flushing around the fireplace can rust and cause a leak. Thoroughly examine the chimney to see where the issue lies. To solve this problem, put a new flashing below the broken chimney.

  • Replace or repair any broken shingles

If your roof is leaking due to moisture build up, then the best remedy is to straighten, repair, or replace the damaged tiles. After straightening the shingle, reattach it using asphalt roof cement which helps it stick back together

  • Reseal roof with protective sealant to stop future leaks and help with keeping it watertight.

This is essential to prevent future issues arising!

The Core Fundamentals of Repairing Leaking Roofs

Repairing a leaking roof can be a tedious task, and often is best to leave to professionals. The nature of the leak will determine will determine whether it’s a repair job, or if a full new roof may be needed. You can repair a leaky roof by filling the small holes, repairing cracks with protective sealant, straightening or replacing damaged shingles, and repairing a plumbing vent. So if you’re ever looking for a Sunderland roofer then you can reach out to Sunderland Roofing Services for a quote.

Tips to Purchase Long-lasting Carpets

Because commercial carpets should tolerate high foot traffic, you will have to carefully consider the important factors before buying one. Luckily, we are here to assist you in searching for the ideal office carpet that will last for several years. Our goal is to guide you to prevent a few usual mistakes carpet buyers usually make while selecting a commercial carpet for their commercial building. Keep on reading and discover how to purchase and select long-lasting carpets. 

Employee’s health 

In the event your workers spend most of their time on their feet, then you might need to consider having a cushioned-back carpet flooring since it provides your feet more support compared to a hardback carpet flooring. Moreover, it helps to minimize muscle strains on your feet over time. Commercial carpets can also captivate more sound compared to other flooring types, which is best to somehow minimize stress.  

Style 

Most carpet shops provide an extensive range of carpet styles that you can select according to the brand and industry of your company. For instance, a law office might require a more traditional carpeting style compared to an advertising agency. Make sure that your chosen carpet style will somehow reflect the brand of your company.  

Carpet tiles 

Accidents are inevitable. So, it would be simpler to purchase spare carpet tiles in the event of having an unexpected spill. Though it might appear to be nonsensical to purchase more commercial carpet tiles than the number of tiles you require, you will thank yourself later that you chose to get spare tiles, especially when somebody spills on your carpet prior to a major meeting event. It would be less expensive and much simpler to change one square compared to replacing a whole carpet flooring.  

Carpet backings 

The kind of backing you select will identify how the carpet will wear eventually. If you are expecting high foot traffic in your office, then, it would be best for you to get a cushion-backed commercial carpet. While people stride over your new carpet, the cushion below it will compress so carpet fibers won’t be crushed.  Another option for you to have is a low pile carpet aside from cushioned backing. When you select hardback carpet, the foot traffic’s pressure can bend the carpet fibers, causing them to wear more rapidly.  

Foot traffic 

You need to consider the estimated number of visitors your office takes within a day since this can impact the type of commercial carpet you should purchase. Commercial carpets are more hard-wearing compare to the ones you would install in your houses since it’s intended to tolerate high foot traffic. Because of this, a lot of office carpets are low pile so that they can be cleaned easily and it gets less dirt.   

Choose the best carpet installer 

If you’ve already bought the best carpet style for your commercial building, make sure to contact the best carpet installer and carpet cleaner within your area, particularly the Townsville Carpet Cleaner as they provide the best carpet installation and carpet cleaning services in Townsville

Advantages and Disadvantages of Merbau Decking

Advantages and Disadvantages of Merbau Decking

Merbau decking is one is of the most mainstream hardwoods for residential and commercial property owners around the world.  It has been utilized for quite a long time in applications where protection from rot and insect infestation is important. If you are pondering laying some Merbau lumber for your home, you may be wondering about the pros and cons of such a choice.

In this article, you will get detailed information about the advantages and disadvantages of Merbau Decking.

Advantages of Merbau Decking

There are various advantages to utilizing merbau deck over different lumbers, including:

Bushfire Resistant

This is one of seven lumbers that have been regarded reasonable for use in bushfire inclined area. It won’t burst into flames without any problem. Other lumbers incorporate blackbutt, red ironbark, red stream gum, silvertop debris, spotted gum and turpentine.

Appearance

Merbau is a profoundly appealing wood that holds its tone far longer than numerous different species. Actually, numerous individuals accept that its appearance just improves with age. Its colour ranges from brown coloured to reddish-brown and has an interlocking grain design.

Outdoor Suitability 

This lumber is profoundly fit to outside use – it is evaluated Class 1 for over the ground use, which makes it an excellent decking material. This is because it is very steady and has a moderately low shrinkage/development rate (which is fundamental).

Workability

Merbau is a durable material. While it isn’t as hard as other local hardwoods, it is very simple to saw through and work with. This implies that you don’t need to strain an excessive amount of with regards to getting ready and laying your decking.

Disadvantages of Merbau Decking

Here are the disadvantages of Merbau Decking.

Oily

You should remember that merbau is a significant slick wood. At the point when it gets wet, it tends to ‘drain’ tannins. These saps can cling to the soles of your shoes and be strolled through your home. You can help stay away from this by buying a well-seasoned or reused stock.

Environmental Impact

Unfortunately, there are barely any controls set up to secure this species or the forests it grows in. According to experts, if harvesting continues, this lumber could be near extinction.

Costly

This point is really connected to the one above; with merbau getting more difficult to find, it is getting progressively costly. Since the greater part of its stock is imported, it can frequently convey an exorbitant cost label that numerous property owners can’t manage. If you’re looking for Lake Macquarie deck builders for your next home reno then we recommend Lake Macquarie Decking Co!